Silent Brushless Suction Unit with Light
This line of silent, low-weight hadewe units is setting a new standard for podiatry drills.
Auroria is the first unit in this line,
and is equipped with many technical subtleties to ensure a secure and
The new units have a brushless suction motor which is not
only very silent, but also much lower in weight. The new units have a brushless
suction motor, which is not only very silent, but also much lower in weight. It
is a pleasure for your ears and your back.
There is a light source, which is directly implemented at
the handpiece, and which allows for ideal work conditions even when the
external light sources are insufficient. You can save preferred pre-set speeds
with the memory settings and use a knob, which is located at the end of the
handpiece to access them directly.
The ergonomic handpiece with a diameter of only 17 mm is equipped with a
light function, which is directly implemented in the handpiece, and allows for
ideal work conditions even when the external light sources are insufficient.
There is a smart key at the bottom of the handpiece,
which allows fast access to important functions. You can easily switch between preset speeds by pressing the key once,
or turn the whole unit on/off by keeping it pressed.
The knob of the Quick Chuck Device, which allows you to
change the tools easily and securely, has been made of TPE (thermoplastic
elastomer). TPE is a soft material that makes it comfortable to use the knob.
Power Clamping System
The handpiece is equipped with a unique, patented
clamping system. A chuck will open inside the handpiece by pressing the well-known
hadewe knob forward. The instrument can now be entered into the unit without any resistance. This is
especially important with smaller, sharp edged tools, since they can cause
injury, if you need too much force to enter an instrument.
Pushing the knob back again will close the chuck, and the
tool will be held very secure, even at high speeds. The tight grip also ensures
the low-vibration running of the hand piece for which hadewe is famous.
Conventional clamping systems with automatic clamping work
with a mechanism in which rolls inside the handpiece wedge the instrument under
pressure. At these systems it is not possible to enter the instrument without
The handpieces with automatic clamping are also more
sensitive to small deviations of tool tolerances. This will lead to higher
vibration and poor holding force. That’s why the power clamping system is
superior in many ways.
The 3 support jaws can be opened manually. This allows
entering of the tools without resistance. It also prevents the tool from
accidentally slipping out.
Ultra-Silent High Performance
According to customer surveys a silent suction is one of the most important criteria to buy a podiatry
drill. The motor itself, as well as the quality of sound damping are important
factors. The use of different kinds of insulating material makes it possible to
reduce a wide spectrum of noise. After all neither a
high frequency squeaking nor a dull humming should disturb your treatment.
Regular suction turbines are working with so called brush
motors. The brushes are grinding on the turning engine shaft, and this wears
them down. This conventional technology has been successfully implemented a
thousand times. However, it has the disadvantages of high brushes attrition as
well as a larger and heavier construction. The suction turbine implemented in
the newer hadewe models (for example Medeas, Auroria and Veloria) is based on a technology without brushes. This
method is also used in modern computer ventilators for example. The advantage
is less attrition and significantly less weight.
Filter Changing & Chuck Cleaning
As soon as the display shows that a filter change is
required, you only need to open the hatch at the side of the unit to replace
the filter with a new one. The filter chamber is easily accessed and can be
comfortably opened thanks to the magnet holders in the door.
The filter bags are classified as class M filters by the
BIA (Germany’s Health & Safety Institute for the work environment), meaning
they have a dust retention capacity of 99,9%.
A simple and fast maintenance of the most basic
components is one of the important qualities of the hadewe
hand pieces. The chuck can be easily removed with the spanner tool delivered
with every unit. Loosen the top of the hand piece, and then turn out the chuck.
The whole procedure takes less than one minute.
Quality Made in Germany
The quality of our products meets highest and latest
requirements, since we know that only premium products can offer professional
performance. For that reason we manufacture according
to highest quality standard. All processes from development to production take
place in our facilities in Hanover, and you receive the whole product from a
single source. Short ways, quick decisions, optimal solutions and creation of
value became our company philosophy. To the benefit of our customers.
Article No: 0976
Size in mm W 273 x H 142 x D 186
(incl. exterior parts) W 313 x H 142 x D 235
Suction Motor Brushless
Weight 2,7 kg
Noise Level 49
- 55 dB (A)
Foot Switch Optional
Carry Cases Suitable
for all hadewe carry cases
rpm - 40.000 rpm
Clamping System Hadewe Power
Handpiece Motor Brushless
Instrument Shaft Size Ø